How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of driver appeal. It has a powerful engine and good visibility. It also has an excellent safety rating.
It is vital to have two keys that work for your vehicle. If you lose just one key, it can be very expensive to add an additional one.
How to Replace the Ignition Key on the Saab 9-3
If your car's keys won't turn on you must replace it. This guide will show you how to replace the ignition key on a Saab 9-3. You'll need a new key, a new reprogrammable battery and a brand new key-fob cover.
The majority of modern Saab models utilize a transponder instead of a key made of metal to unlock the vehicle and allow it to start. The reprogrammable batteries inside the key-fob eventually become worn out and will not be able to hold charge. This is particularly when you keep using the same key in the same lock.
A professional locksmith can change the battery quickly. If you have the right tools and patience you can do it yourself. The first step is to separate the key-fob. Insert flatheads into the slot that is in the middle of your case. It is important to be careful, as the plastic is extremely thin and can easily be damaged.
Once the case is opened then you can prepare the new key by combining the lower half of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is mated to the CIM properly, which can make all the difference when replacing the original key for your Saab 9-3.
How to replace the ignition Key on the Saab 900
Unless you have two keys, you'll need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can take off the trim and dashboard pieces around the steering wheel. After the dashboard is removed, you can put an screwdriver through the hole behind the ignition switch and take it out.
The ignition cylinder houses key locks that could stop the car from starting if the key isn't in it. If the ignition switch on your 900 doesn't work correctly, make sure to check whether the key is within the lock or snared within the ignition barrel. It is also important to rotate your keys and keep them clean to avoid being bent.
Saab cars differ from other vehicles because they don't use traditional keys made of metal. Instead, the car detects the key fob's electric signals by a specific chip inside it.
If you lose your sole working key fob the dealer will charge you the most expensive dollar for the replacement of your computer module (known as the CIM). However, we can reprogram your existing computer's EEPROM to prepare it to accept new keys without replacing it. This can save you over 50% of the cost the dealer charges! This is the SAAB KEY PROGRAM. Find out more information about it here!
How to replace the ignition Key on a Saab 9-5
The metal part of a classic Saab key is simple to duplicate, and it's not a major obstacle against theft of a vehicle. The electronic component of the key fob has a chip that can recognize the car when the key is placed in the ignition switch.
Saab has relied on the technology of this anti-theft system for more than 10 years. It's not as effective as an actual lock on the door however it makes the theft of your car much more difficult. This is why every Saab owner should always have an extra key in their possession.
The majority of new Saabs come with two keys right from the factory. However, you can purchase additional keys at a dealer through a special handheld computer referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is NG 9-3 cars, which have modern, more advanced features that require a separate key-fob to utilize a different process.
If you lose all keys and the dealer replaces your CIM or TWICE modules and charge the cost of replacement. However, we can reprogram your EEPROM in your existing computer and prepare it to accept new keys, and not replace the expensive modules.
How do I replace the ignition Key on the Saab XC90
If your SAAB 9-3 key fob begins having problems turning the barrel of the lock it's possible that it's time to replace it. The process is fairly simple and you don't need to visit a dealership. You can complete the process at home, using a couple of basic tools.
You'll first need to prepare the new keys. Before you begin, disable the anti-theft by placing blocks underneath your rear wheels, and then releasing your handbrake. Insert the key in the ignition and turn it to the "on" position. This will activate the accessories, but will not start the engine. Repeat this five times, then turn off the key in the "on" position.
saab replacement key programming is to buy a new case for your old key fob. They can be found in most auto parts stores and are usually inexpensive. You can purchase them without electronics based on the model.
To open the case, place a flathead screwdriver inside the slot in the middle and gently work it. When you've split the case, you'll be able to access all the internal electronic components. To get rid of the electronics, use a small flathead screwdriver and attempt to pull them out gently.